Cleaning and Maintenance

From Open Source Sim
Jump to navigation Jump to search

Anything Stick/Gummy WD-40 Nate Brent-St. Joseph's Hospital and Medical Center Use a rag soaked in WD-40 and place it on the sticky residue. Allow it to sit for 10-15 min. The WD-40 will break down the glue, and it can be scraped off. Particularly useful with really thick messes.

ink/marker stains Apply a liberal amount of Clearasil (brand or generic, they both work) to the mark, completely covering it. If you have available sunlight, or a UV light, lay the affected part in that light. Depending on the age and amount of ink, it could take a couple of days to remove the stain, but so far (knock on wood) I have had good results with this. Judi Leisk, RN, BSLS, BSN Health Sciences Resource Center Faculty Assistant Bellin College

Stained Skin Clorox Bleach Wipes Scott Atkinson

Tape residue Wet the spot and shake baby powder onto the damp surface.ᅠLeave it a few minutes and then wipe it off with a damp cloth. Dixie Sollazzo, Wor Wci Community Collete I discovered this accidentally when I was cleaning my mannequins.ᅠᅠ I have used numerous products to clean the tape off the plastic.ᅠOne day I was in a hurry and applied the new baby powder before the plastic was dry.ᅠ When I wiped it off, the tape mark came with it.ᅠ Now I use nothing but baby powder. I've gotten marks off that won't come with anything else.